2019.0.8.1 GB/EN

Design

Choose the Version
Choose the Engine
Wheels
  • 15" 'Enjoy' machined Atom alloy wheels
  • Leather steering wheel and gear knob
  • Tinted windows (including dark tinted rear windows)
  • Halogen daytime running lights
  • Air conditioning
Chassis

Front suspension

Independent McPherson type with coil springs and hydraulic dampers

Rear suspension

Semi-rigid rear axle with coil springs and hydraulic dampers

Steering system

Electro-mechanical power assisted

Turning circle diameter

9.3m

Anti-lock Braking System (ABS)

Front/rear brake type

Ventilated disc / drum

Front brakes (min/max)

256 x 22mm

Rear brakes (min/max)

200 x 40mm

Kerb weight (with driver) (min/max): 934kg - 936kg

Permissible gross weight (min/max): 1,330kg

1.0 12V 60PS

Max. Power ( 6,000 rpm)
44 kW
Max. Torque (3,000 - 4,300 rpm)
95 Nm
Max. Speed
100 mph
Acceleration (0 - 62 mph)
14.4 secs
Cylinders
3
Displacement
999 cc
Compression Ratio
10.5
Bore & Stroke
74.5 x 76.4 mm
CO2 Emissions
97 g/km
Dimensions
Length
3,557mm
Width
1,645mm
Height
1,478mm
Track front
1,428 - 1,424mm
Boot capacity
251l
Fuel tank capacity
35l

Our global range of cars and product specifications varies from country to country. Please, visit your local SEAT website to know more about the product offer available for you.

“The specified fuel consumption and emission data have been determined according to the measurement procedures prescribed by law. Since 1st September 2017, certain new vehicles are already being type-approved according to the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), a more realistic test procedure for measuring fuel consumption and CO2 emissions. Starting on September 1st 2018, the New European Driving Cycle (NEDC) will be replaced by the WLTP in stages. Owing to the more realistic test conditions, the fuel consumption and CO2 emissions measured according to the WLTP will, in many cases, be higher than those measured according to the NEDC. For further information on the differences between the WLTP and NEDC, please visit our web page http://www.seat.com/company/wltp-standard.html

We are currently still required by law to state the NEDC figures. In the case of new vehicles which have been type-approved according to the WLTP, the NEDC figures are derived from the WLTP data. It is possible to specify the WLTP figures voluntarily in addition until such time as this is required by law. They are intended exclusively as a means of comparison between different vehicle types. Additional equipment and accessories (e.g. add-on parts, different tyre formats, etc.) may change the relevant vehicle parameters, such as weight, rolling resistance and aerodynamics, and, in conjunction with weather and traffic conditions and individual driving style, may affect fuel consumption, electrical power consumption, CO2 emissions and the performance figures for the vehicle.

For more information about official fuel consumption and CO2 emissions values in new passenger cars, check the “Guide to passenger cars for sale in Spain, showing CO2 consumption and emissions”, available at all dealerships and on the webpage of the Institute for Diversification and Saving of Energy (http://coches.idae.es/PDF/GuiaFinalN.pdf.)“

Show more
Book a test drive

Book a test drive

Find a dealer

Find a dealer

Configure it

Configure it

Book an appointment

Book an appointment

Chat

Chat